PERCo CT/L-04.2, Assembly And Operation Manual

Page: 59 / 70

User Manual
2. Click in the working area of the page on the line with the name of necessary reader, to
add the reader in the list click the Add button. The window Reader ( number ) will be
opened:
3. In the opened window make the necessary changes of the Settings:

selector Number: specifies the number of added reader.

selector Operating device: specifies the number of the OD to which the reader is
attached.

selector Direction: sets the direction of the OD to which the reader is attached.
4. Click the Save button. The window Reader (number) will be closed, changed Settings
will be passed to the controller, added reader with assigned number will be added in the
list.
5. To remove the reader from the configuration, click the Delete button. Window Reader
(number) will be closed, the reader will be removed from the list.
6. To exit from the window Reader (number) without saving changes, click the button
Cancel . Also, it is possible to close the window using the Close button .
4.2.4 The reading format of the card
identifiers
Attention!

Change of this parameter when you have already entered the access control
cards, results in the passage on these cards will be impossible.

When connecting to the controller working under software of PERCo systems,
the current formant may not be shown (nothing is selected from the formats). In
this case to change the reading format of card identifiers is
PROHIBITED .
To select the reading format of card identifiers:
1. Click consistently in the Web-interface menu: Configuration → Edit → Card format .
The page with working area will be opened:
2. Using the drop-down list Card reader operating mode: select one of offered formats
and click the Save button.
58