PERCo CT/L-04.2, Assembly And Operation Manual

Page: 24 / 70

CT/L-04.2 Controller
Figure 4. Connection schemes of the locks
2. Connect the lock (the latch) to XT6 or XT9 connecting blocks on the lower board of the
controller is made in accordance with scheme (Figures 3 - 5).
3. If you need to connect remote control button, connect it to XT2 ( XT10 ) of lower board
of the controller (Figure 5).
4. The reed switch is connected to XT1 connecting bloc of lower board (Figure 5). The
door sensor with the lock controlled by OUT1 is connected to IN1 input, OUT2 to IN2 ,
etc. The door sensor must be mounted that when the door is closed, the sensor can
always actuate.
Note:
The locks LB- , LBP- series do not require mounting of the door sensor (the
CT/L-04.2 controllers can trace the door opening based on the contact group of the
lock). In this case, is necessary to installed jumpers on the lower board of the
controller: for
OUT1 – XP5.1 and XP5.2 , for OUT2 – XP6.1 and XP6.2 , for OUT3 –
XP7.1 and XP7.2 , for OUT4 – XP8.1 and XP8.2 (Figure 1).
23