Pentax 16101 Operating Manual Download Page 39

Page: 39 / 264

Gettin

Sta

rte

Press the battery lock lever in the direction of

and

insert the battery so that the PENTAX logo is facing
toward the lens.

Match the marks on the battery to the marks inside the battery
compartment and push the battery in until it is locked in place.

Close the battery/card/terminal cover.

Slide the battery/card/terminal cover in the opposite direction indicated
by

. If you hear a click, the cover is securely closed.

Open the battery/card/terminal cover.

Press the battery lock lever in the direction of

The battery will be ejected. Take care not to drop the battery when
removing it.

Make sure that the battery is inserted with the PENTAX logo pointing
toward the lens. If the battery is incorrectly oriented, malfunction may
result.

Removing the Battery

Summary of Contents for 16101









































































































































































































































































Search results

Summary of Contents for 16101

Reviews:

Related manuals for 16101

Brands by name

Popular brands

Pentax 16101, Operating Manual

Search results

Summary of Contents for 16101

Reviews:

Related manuals for 16101

Brands by name

Popular brands