DRAFT
MTSE
IO&M Manual
13
Paragon Controls Inc,
Rev J 2/3/2021
4.2.
Setup Menus
In each of these menus, the parameters for Systems 1, 2, and 3 (description of a System can be found in
Section 3.2) will be configured. For example, if the user is in the Operating Range Menu the operating
range for Systems 1, 2 and 3 will be set in this page. Only Systems that have been configured in the
Factory menu will be displayed in the Setup Menus. Therefore, the pages in the Setup Menus may look
different from your setup if the sensor quantities were only entered for one or two systems at the
Factory.
All Setup Menu pages will write each System’s parameters to internal memory and also be backed up on
the microSD card. Some settings are not System specific and will be applied to all (3) Systems. These
settings are as follows:
a)
Altitude and Altitude Units
b)
Temperature Units
c)
Communications
Each page has a question mark icon in the bottom right corner for Help Dialogue. Selecting this icon
will navigate to a help screen detailing the parameters and their functions of the previous page. Shown
below is the Setup Menu Main page.
The structure of the Setup Menu is shown in the flow chart below. A detailed explanation of each Setup
Menu item is described in the following subsections.
