DRAFT
MTSE
IO&M Manual
10
Paragon Controls Inc,
Rev J 2/3/2021
3.2.1. Display Types
Depending on how your MTSE was ordered, the System quantity and ΔP quantity will change the
appearance of the Normal Active Display. Shown below are images of a single system and a two-
system configuration with no ΔP points of measurement. If ΔP points of measurement were ordered,
they will appear at the bottom of the display similar to what is shown and described in Figure 3.1.
Figure 3.2 – Normal Active Display for a single system and two systems.
