DRAFT
MTSE
IO&M Manual
11
Paragon Controls Inc,
Rev J 2/3/2021
3.3.
Display Features
3.3.1. Sensor Data Page Shortcut
Touch anywhere within the dashed red box on any of the Normal Active Display Types (whether it is
one system or up to three systems) and the user will be taken to the Sensor Data Page which displays the
flow rate and pressure for each individual sensor. See Section 4.3.1, Senor Data Page Section for more
details.
3.3.2. Keypad
In most setup menus, it is necessary to enter numeric values for the settings. These values will be
entered through a popup keypad, like the one shown below:
1.
Parameter Information: Indicates what parameter is currently being entered
2.
Max: Maximum allowable value to be entered for the given parameter
3.
Min: Minimum allowable value to be entered for the given parameter
4.
Units: Displays the units for the given parameter being entered
The acceptable range of values that can be entered for a given parameter are shown in the popup keypad
as Max and Min, Item 2 and 3 in the above image. After keying in the desired value press Enter to
return to the previous menu. If you press Back, you will be returned to the previous menu and no values
will have been saved or modified.
