GRL-PCIE5-CEM-RXA User Guide and MOI
Rev7.0
© Granite River Labs 2022 Version 7.0, June 2022. Updated 06.29.2022
Page 13 of 123
System & Accessory
Qty.
Description/Key Spec Requirement
Computer (laptop or desktop)
1
Windows 7+ OS
For automation control
[a]
Oscilloscope with scope software requirements as specified in
vendor specific MOI’s.
For example, when
using the Keysight Scope, scope software such as Keysight InfiniiSim / EZ-JIT / Serial Data Analysis / Serial
Data Equalization that are required for testing and signal processing must be pre-installed on the Scope.
Similarly, the Tektronix Scope shall be used with DPOJET (Jitter and Eye Analysis Tools)
software for making
measurements.
[b]
Oscilloscope with scope bandwidth as specified in vendor specific MOI
’
s.
[c]
MU181000B Option 02 is required for testing the System Board DUT.
[d]
The GRL-PCIE5-CEM-RXA software supports PAM4 PPG in NRZ mode.
[e]
The J1890A and AH54192A are packaged separately. Check the contents of both boxes. The AH54192A is
supplied as a set with dedicated power supply AH54192A-01. See Appendix B for more details.
[f]
See Appendix C for more details.
T
ABLE
2.
E
QUIPMENT
R
EQUIREMENTS
–
C
ABLES
Cable
[a]
Qty.
SMA-to-SMA cable
4
SMA coaxial cables
1 pair
Phase matched K-K coaxial cables
3 pairs
J1746A K-K cable set
(to connect between MU195020A and MU195050A)
1
J1627A GND connection cable
1
BNC-to-SMA cable
1
[a]
Based on the standard test configuration. May require more or less cables depending on the DUT type.
