IP Filter Configuration window
209
Models 2616RC, 3096RC & 3196RC Admin Reference Guide
13 • IP Filtering
Defining a new filter
To define a new filter, enter an ID number and a name, then click on the
Define
button to submit the request.
The number and name must not already exist in the
Defined Filters
list, and the number must be an integer
between 1 and 20. The new filter is displayed in the
Defined Filters
section of the
IP Filtering Overview
window
(see
figure 116
on page 208).
The filter must now be configured. Click on the filter
ID Name
hyperlink (“mailserver” in
figure 117
) to dis-
play the
IP Filter Configuration
window (see section “IP Filter Configuration window”).
Figure 117. ID Name hyperlink
Deleting a filter
To delete a filter, enter just the ID number of the filter that you want to delete in the
ID
box. Leave the
Name
box blank, then click on the
Define
button. The filter is deleted.
IP Filter Configuration window
The
IP Filter Configuration
window (see
figure 118
) is where you can modify filter parameters or delete a filter.
Figure 118. Filter IP parameters window
The following sections describe the parameters that can be configured for IP filtering
.
Note
Any changes to a filter take place immediately when you click the
Modify
button. This can aid in troubleshooting a filter profile while
the user is online.
Name (filterIpName)
The the name of the filter being modified.