iDSL Port Configuration window
136
Models 2616RC, 3096RC & 3196RC Admin Reference Guide
10 • iDSL (Model 3196RC)
Figure 69. Color-coded port status example
Color-coded port status indicators
The iDSL Port Status table displays colored rows (see
figure 69
) to indicate port status for each port. The
color-coded indications are described below:
•
Green—The port is currently in dataMode(1) state. An iDSL link is established with the remote CPE. The
link is ready and able to transfer data.
•
Blue—The port is operating in one of the following test modes:
-
localLoop(1)
-
remSerLoop(2)
-
lineLoop(3)
•
Yellow—The port is currently in
initializing(1)
state and the link establishment timer has not expired
•
Orange—The port was in
initializing(1
) state and could not establish the iDSL link, therefore it moves to
lineDown(7)
state.
•
Red—The port is currently in hardware failure state (see section
“Current State (idslCurrentState)”
on
page 135)
Desired State (idslDesireState)
Configurable. Indicates the T-DAC operator’s current intentions for the port.
•
Deactivated(0)
—Default value. The T-DAC operator intends the port for future use. Use this value when
the port is not currently connected to a remote CPE modem.
•
Activated(1)—
The T-DAC operator intends the port to be connected to a remote CPE modem for current
active use
•
Reset(2)
—The T-DAC operator intends to reset the iDSL port.
Test Mode (idslTMSelection)
Configurable when the value of port State is one of the following:
•
initializing(1)
•
datamode(6)