G.SHDSL Port Details window
122
Models 2616RC, 3096RC & 3196RC Admin Reference Guide
9 • G.SHDSL (Model 3096RC)
Note
The
Line Provision Rate
parameter label also functions as a hyperlink.
Click the Line Provision Rate hyperlink to open the
G.SHDSL Line
Provision
window (see
“G.SHDSL Line Provision window”
on
page 129).
•
Clock Mode
(gshDSLClockMode)—Indicates whether the clocking for this G.SHDSL link is provided and
controlled by the T-DAC or the remotely connected CPE device.
•
Payload Rate
(gshDSLPayloadRate)—Defines the payload rate (i.e. data rate as opposed to line rate) for
this G.SHDSL link. The following values of Payload Rates may be defined for T-DAC G.SHDSL ports:
Note
If the Payload Rate has been configured for either r64(1) or r128(2),
the DSL link will establish at 192 kbps. The 3096RC will then con-
figure the lower payload rate using EOC, a process which may take
up to 2 minutes. The CPE will then retrain. It will properly pass data
only after the link comes up the second time.
•
# of I-Bits
(gshDSLIbitSel)—Defines the number of I bits transmitted in each G.SHDSL frame. The fol-
lowing values may be defined:
-
b0(0)
-
b1(1)
-
b2(2)
-
b3(3)
-
b4(4)
-
b5(5)
-
b6(6)
-
b7(7)
•
Annex Type
(gshDSLAnnexSel)—Defines the Annex type to be used on the link connected to this port.
The following values may be defined:
-
annex-A(1)—Typically used in North America
-
annex-B(2)—Typically used outside North America
•
Transmit Power
(gsDSLTxGain)—Enables you to increase or decrease the transmit power setting in 1-
decibel increments.
-
r64(1)
-
r128(2)
-
r192(3)
-
r256(4)
-
r320(5)
-
r384(6)
-
r448(7)
-
r512(8)
-
r576(9)
-
r640(10)
-
r704(11)
-
r768(12)
-
r832(13)
-
r896(14)
-
r960(15)
-
r1024(16)
-
r1088(17)
-
r1152(18)
-
r1216(19)
-
r1280(20)
-
r1344(21)
-
r1408(22)
-
r1472(23)
-
r1536(24)
-
r1600(25)
-
r1664(26)
-
r1728(27)
-
r1792(28)
-
r1856(29)
-
r1920(30)
-
r1984(31)
-
r2048(32)
-
r2112(33)
-
r2176(34)
-
r2240(35)
-
r2304(36)