Defining a T1/E1 Management Channel
157
Models 2616RC, 3096RC & 3196RC Admin Reference Guide
11 • In-band management
Figure 88. Defined In-Band Management Channels section
Note
You can also directly access the DLCI configuration page by clicking
on the
DLCI…
link under the
IP Address
and
IP Mask
columns.
From the DLCI configuration page, you can view current statistics.
For complete information on configuring a Frame Relay link, refer to
chapter 8,
“Frame Relay”
on page 91.
Deleting the T1/E1 management channel
1.
If you need to change the parameters for the T1/E1 management channel, you must first delete it and cre-
ate a new one by clicking on
T1/E1
in the
Interface Type
column. The
WAN Circuit CONFIGURATION
LINK: 1
page displays (see
figure 89
).
Figure 89. WAN Circuit Configuration Link window
2.
Click on the
Channel Assignment…
hyperlink, change the channel assignments from
Frame Relay
to
Clear
,
and click on
Submit Query
.
3.
Go back to the
In-Band Management Overview
to verify that the T1/E1 management channel has
been deleted.
