System Log Overview window
277
Models 2616RC, 3096RC & 3196RC Admin Reference Guide
19 • System Log
•
Non-Volatile Memory—Clicking on the
Non-Volatile Memory…
link displays the
System Log Messages in
Non-Volatile Memory
window where you can view the system log messages currently stored in the T-DAC
NVRAM. The
System Log Messages in Non-Volatile Memory
window is described in section
“System Log
Messages in Non-Volatile Memory window”
on page 284.
Figure 155. Parameters section of the System Log Overview window
System Log Parameters
The following sections describe the
System Log Parameters
section of the
System Log Overview
window (see
figure 155
).
SysLog Daemon IP Address(syslogDaemonIP)
The IP address of a host computer system which is running a syslog daemon. System messages with a priority
greater than or equal to the configurable syslogDaemonPriority will be sent to this IP address (see section
“Pri-
ority”
on page 281).
SNMP Trap Daemon IP Address (syslogTrapIP)
The IP address of a host system which is running a SNMP trap daemon. SNMP Trap messages with a priority
greater than or equal to the configurable syslogTrapPriority will be sent to this IP address.
Min Priority for SysLog Daemon (syslogDaemonPriority)
System messages which have a priority equal to or greater than this setting will be sent to the syslog daemon
defined by the SysLog Daemon IP Address (syslogDaemonIP).
•
priorityVerbose(5)
•
priorityDebug(10)
•
priorityInfo(20)
•
priorityOddity(40)
•
priorityService(60)
•
prioritySystem(80)
•
priorityDisable(1000)
