![background image](http://html2.mh-extra.com/html/patton-electronics/forefront-2616rc/forefront-2616rc_administrators-reference-manual_4061756126.webp)
G.SHDSL Port Details window
126
Models 2616RC, 3096RC & 3196RC Admin Reference Guide
9 • G.SHDSL (Model 3096RC)
-
Active—The switch is toggled to the bottom position. The 3086 is operating in Remote Loopback mode
as shown in
figure 60
.
Figure 60. CPE remote loopback
Saving your work
Once you have defined your desired values for of the configurable parameters shown in the G.SHDSL port
configuration tables, you must click the
Submit
button (see
figure 56
on page 121) to save your settings into
volatile DRAM. Once you click the button, the T-DAC will implement the new parameter values immediately.
Note
To save your changes permanently (i.e. through a power cycle), you
must visit the T-DAC HOME page, and click the
Save Current Con-
figuration
button. When you click the
Save Current Configuration
button, the T-DAC will copy the configuration currently stored in vol-
atile DRAM into non-volatile Flash memory for permanent storage.
Hard Reset This Port button
When you click the
Hard Reset This Port
button (see
figure 56
on page 121), the T-DAC will reset the port hard-
ware for the G.SHDSL port indicated in the page title. When the value of
State
for this G.SHDSL port is
error(5)
(displayed on the
G.SHDSL Port Configuration
page), you can click this button to clear the error condition for
the port.
3196RC
Data stream
CPE
DSL line