![background image](http://html2.mh-extra.com/html/patton-electronics/forefront-2616rc/forefront-2616rc_administrators-reference-manual_4061756156.webp)
Defining a T1/E1 Management Channel
156
Models 2616RC, 3096RC & 3196RC Admin Reference Guide
11 • In-band management
Example 1: T1/E1 Frame Relay Management Channel
Do the following to create a Frame Relay channel on T1/E1 port #1, timeslots 1–4:
Figure 86. Define a T1/E1 Management Channel window, frameRelay(3) function selected
1.
Set the parameters as follows:
– Port: port1(1)
– Function: frameRelay(3)
– Timeslots: 1–4
2.
Click the
Define
button.
Note
Since you are configuring the T1/E1 port for Frame Relay, the
timeslot will automatically be set to Frame Relay, even if the timeslots
were previously configured for PPP.
Figure 87. Defined In-Band Management Channels and Define a T1/E1 Management Channel sections
3.
Click on
T1/E1
under the
Interface Type
column in the table to view or modify the T1/E1 link parameters.
4.
Click on
Frame Relay
under the
Protocol Type
to view the link’s status and HDLC statistics or modify the
DLMI and DLCI parameters.