Parker PowerStation XT Series, User Manual

Page: 5 / 99

CE Statement of Compliance
Product Type: XT/IX/PCA PowerStations, Industrial HMI and PCA Products
XT/IX/PCA PowerStations comply with the protection requirements set up by the European Community
(EC) Electromagnetic Compatibility (EMC) Directive 2014/30/EU as defined by the Product Specific
Standard EN55022 and EN55024, which includes both emissions and immunity requirements and the
power line emissions standards EN/IEC 61000-3-2, Limits for Harmonic Current Emissions and EN/IEC
61000-3-3, Limits of Voltage Fluctuations and Flicker in Low Voltage designated for Equipment used in
Industrial Locations. In addition, compliance of the PowerStations is demonstrated by the application of
the following standard:
◼
2014/35/EU Low Voltage Directive when installed, operated, and maintained as intended
◼
EN 60950-1:2006 +A11:2009 +A1:2010 + A12:2011 + A2:2013
◼
IEC 60950-1 (ed.2) + Am1:2009 + Am2:2013
◼
2014/30/EU Electromagnetic Compatibility when installed, operated, and maintained as intended
FCC Statement of Compliance
Product Type: XT/IX/PCA PowerStations, Industrial HMI and PC Products
Warning: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Note: Any changes or modification not expressly approved by the party responsible for compliance could
uthority to operate the equipment.
◼
FCC 47 CFR Part 15 Subpart B Class A, ICES-003 Issue 5-2012, ANSI C63.4-2009