Parker PowerStation XT Series, User Manual

Page: 49 / 99

Daylight Saving Select this option to activate the daylight savings settings. Your
time and date will update accordingly throughout the year.
Click OK to accept the changes and return to the Time and Date screen. Click Reset to reset the values to
the default settings and return to the Time and Date screen. Click Cancel to return to the Time and Date
screen without saving.
Calibrate Touchscreen
The XT touchscreen will come calibrated from the factory. But if you need to re-calibrate
the touchscreen, follow these instructions. From the Xpress Shell, you can navigate to the Calibrate
touchscreen.
At the start of this procedure, a circle will appear in the upper left hand corner with a red dot in the middle
of the circle. Use your finger or stylus to touch and hold in place until the circle goes away. This process
will repeat for each of the corners of the screen. After the fourth corner, calibration is complete. To skip
the procedure, do not press the touchscreen for a few seconds to allow the software to timeout or press
using an attached keyboard.
Configuring Network Settings
With the Network Settings menu option you can view the status of each network setting including: Machine
Name, Port Number, Network Connection, IP Address, Subnet Mask, Default Gateway, Primary DNS,
Secondary DNS, Primary WINS, Secondary WINS, and Proxy Server configuration options. .
Click on the Edit... link to change the network settings. The following table describes the options available
from the Network Settings screen.