[Setting the cassette (How setting to leg section)]
35
Confirm the imaging part and the cassette size,
and insert the cassette into between the bases,
and move the cassette to proper position.
●
To set the cassette tray in the Leg section, use the
cassette tray adjuster installed in the main unit.
Please note that cassette tray can not be used alone.
When hold the handle part of the cassette tray
adjuster, pull out it slowly from the bed facing
the arrow "Pull".
Set a cassette in the cassette tray adjuster.
Insert the cassette tray adjuster slowly facing the arrow "Push" along slide-rail that installed in
the main body.
[Set range of cassette tray adjuster]
●
Cassette tray adjuster is set between slide rail that
installed under the bottom of main body.
●
Check the set range of cassette tray adjuster as
shown on the left figure.
●
Cassette tray adjuster can not be used in out of
this range.
Set cassette tray adjuster to an arbitrary position.
When does not use cassette tray adjuster, fix cassette
tray adjuster firmly to main body clip as shown on the
left figure.
●
Bed is set in horizontal condition when using the cassette tray adjuster. Cassette tray
adjuster may jump out suddenly, causing injury.
●
Insert cassette tray adjuster between slide rails that installed in main body. If use other part
between the slide rails, could cause cassette tray adjuster and the bed to be damaged.
●
When pulling out the cassette tray adjuster, please pay attention to the surrounding area.
Cassette tray adjuster may causing injury to people or things.
●
Keep cassette tray that placed cassette tray adjuster in specified size. There is a risk of
injury by falling etc.
●
When does not use cassette tray adjuster, make sure to fix it using clip for fixing cassette
tray adjuster. It may jump out suddenly and causing injury.
Cassette tray adjuster
Handle
Cassette tray
Cassette tray adjuster
Pull
Push
1
2
3
4
Slide rail
Set range of cassette tray adjuster
Slide rail
5
6
Clip for fixing
Cassette tray
adjuster
