4. Footboard with writing table (KC-860)
Setscrew
Loosen
Tighten
Raise
Lower
Writing table
44
●
The description in this instruction manual may differ from the actual product due to
specification changes. For any queries, please feel free to contact your distributor.
●
Remove any object on the table to prevent the object from falling off when moving the
stretcher.
●
Fully insert the attachment ends of the footboard into the accessories attachment holes.
●
Firmly tighten the clamping screws. Otherwise, you run the risk of injury should the
footboard detach accidentally and over turn.
●
Make sure that the footboard is mounted in the proper orientation. If the orientation is
reversed, there is a risk of the table striking the patient and causing injury when it is lowered.
●
The maximum load capacity of the table is 20kg. Overloading may damage or deform the
table.
●
Do not place objects that are hotter than 80
℃
on the table as this may cause damage or
discoloration.
●
Immediately wipe off any water or chemicals spills on the table. Failure to do so may result
in damage to the table.
●
When lowering the table, take care to prevent the fingers from becoming caught in the gap
between the table and the frame.
■
The footboard with writing table attached can be mounted and removed as required. It
should be removed for lower-limb treatment.
[Mounting the footboard]
①
With the writing table in the lowered position and facing outward,
insert the mounting sections into the accessories attachment holes at
the foot end.
②
Turn the setscrews to fasten the footboard in place.
③
To use the writing table, rotate it upward to the horizontal posiiton.
[Remove the footboard]
①
If the writing table has been used, slowly rotate it downward to its
original position.
②
Loosen the setscrews, and then use both hands to hold the
footboard at both sides and lift it out of the attachment holes.
Writing table
Mounting section
Accessories attachment hole
SUITABLE PRODUCTS
This writing table is designed to be attached to the PK-8000 series to write on the table.