7. Transfer board (PK-80**B only)
■
Transfer boards can be used to protect a patient on the stretcher from falling off and also
as a bridge between the stretcher and a bed when transfering a patient to/from a bed. They
can be used as an arm table by locking them in the horizontal level position.
●
After raising the transfer boards or locking them in the horizontal level
position, use the safety lock and confirm that they are properly locked
(green shows in the indicator window). If they are not locked properly (red
shows in the indicator window), the transfer boards may lower and patient
may fall off and get injured.
[To raise]
[To lower]
Transfer
board
Warning
label
Transfer
board
28
①
Slowly lift the transfer board, which has been
lowered, in the direction shown in the figure to the
left. When it reaches the upper limit, the lug lowers
and the stopper works.
②
Confirm that the stopper is properly working (green
shows in the indicator window).
③
Press in the safety lock in the direction shown by the
arrow (transfer board side) until the red lable
can no longer be seen for proper locking.
●
Make sure that sheets don't get
caught in the stopper or safety lock
because they hinder their functions.
①
Release the safety lock.
②
While lifting the lug, slowly lower the transfer board.
