●
The patient should be transfered by at least two persons for safety.
[To transfer a patient from a bed to the stretcher]
A: Return the caster operation pedal of the stretcher
to the horizontal position.
B: Lower the transfer board and the side rail of the
bed.
C: Place the stretcher by the bed.(See p.25 and p.28)
●
When placing the stretcher by a bed, prevent the transfer board or transfer board receptacle
of the stretcher from sitting on the side rail (foldable type) of the bed. Otherwise, the side rail
of the bed or the transfer board may get damaged or deformed.
Depress the caster operation pedal (red) of the
stretcher to lock the casters and then align the height
of the stretcher to the height of the bed. (See p. 23
and p.25)
●
Set the stretcher slightly lower than the
bed for easier transfer.
Unfasten the restraint belts of the stretcher and move
them so that they will not hinder the transfer
procedure. And then transfer the patient onto the
stretcher.
●
When there is a wide gap between the
stretcher and the bed, the transfer board
can be placed over the bed.
●
If using transfer tool, please read the
tool's instruction manual.
38
Bed
Bed siderail
Caster operation pedal
Transfer board receptacle
Transfer board
Transfer board
Transfer board
Height up pedal
Caster operation pedal
Restraint belt
Transfer board
Height up pedal
Caster operation pedal
Transfer board
(PK-80**B only)
