3. IV Pole (KC-56A/KC-56B/EC-562)
①
Insert the IV pole into one of the accessories attachment holes, and them tighten the
setscrew to fasten the IV pole.
②
Loosen the knob bolt on the IV pole, and then move the slide pipe up and down to
adjust the length. When the pipe has been adjusted to the desired length, tighten the
knob bolt to fasten the pipe.
③
Hang the intravenous bags or similar items on the IV pole.
●
Do not move the stretcher with holding the IV pole. The IV pole may break, resulting in an
injury.
●
Do not use the IV pole as a support to stand up. The IV pole may come off or break, causing
an injury due to falling down.
●
When using the IV pole, do not put a hand or arm between the mattress base or the transport
handle and the IV pole. The hand or arm may get caught and get injured.
●
Each hook's load capacity is 1 kg. Do not hang an article exceeding the load capacity
because it may damage the hook, resulting in an injury.
●
Length adjustment of the sliging pipe should be kept within 70cm. If the sliding pipe is
pulled out too much, it may come off, resulting in an injury or damage.
■
The IV pole is used for hanging intravenous drip bags and similar items.
43
●
The IV pole can be stored on the groove in the base cover.
●
The description in this instruction manual may differ from the actual product due to
specification changes. For any queries, please feel free to contact your distributor.
Setscrew
Loosen
Tighten
Hook
Slide pipe
Accessories attachment hole
Storage IV pole
Knob bolt
Loosen
Tighten
※
The IV pole can be attached in the accessories attachment holes of side-rail, In case of
PK-8111B/8121B/8131B.
(KC-56A)
SUITABLE PRODUCTS
This IV pole is designed to be attached to the medical device when giving an intravenous drip
to a patient.
