■
When performing the height adjustment or inclination angle adjustment,
pay attention not to hit the wall, beam, or power outlet on the wall.
●
The stretcher or wall may be damaged or
deformed. Make sure that the stretcher
does not hit the wall, beam, or power outlet
during the height adjustment or inclination
angle adjustment.
■
When setting up the stretcher, make sure that there is at least15 cm
clearance from the wall.
●
The main frame moved back and forth
during inclination angle adjustment and
could hit the wall, causing damage or
deformation of the stretcher.
■
Check around the stretcher before operating the stretcher.
Secure at least 15 cm clearance from the wall.
●
The stretcher operations may damage objects located around the stretcher, or may
cause the stretcher to be damaged or deformed.
■
Avoid transporting over uneven floors.
●
This may cause damage to the stretcher,
or deformation of failure of the stretcher. If
moving on uneven floor is necessary, move
the stretcher as slow as possible.
16
