2. Knee raising (PK-8*2*B only)
■
Handle operation is enabled by grasping the knee-raising handle crank and pulling it forward.
●
Make sure that a body part (especially head or neck) is not placed in the gap between the
back section base and the frame when operating the knee-raising handle. The part may get
caught, resulting in injury.
●
Make sure the casters are locked whenever a knee section base operation is performed. There
is a risk of injury to the patient if the stretcher moves during a knee section base operation.
●
Remove the restraint belts (2 pairs) whenever a back section base operation is performed (see
p.27). There is a risk of injury.
●
After use, be sure to press the handle into the original position. If it is out, it may catch
people's leg, causing an injury.
●
Do not place your leg on the handle. You may fall down and get injured or the handle may
break.
●
Do not operate the handle slily. There is a risk of injury or malfunction.
●
Using the handle without completely pulling it out may cause a failure. Be sure to pull it out
completely before use.
●
Do not excessively turn the handle.Turning the handle excessively may result in the handle
damage or malfunction.
①
Grip part (a) of the handle to be
operated and pull it out the end.
②
Raise the grip vertically, hold the
grip, and turn the handle.
●
To raise the knee section base, turn the
handle clockwise.
●
To lower the knee section base, turn the
handle counterclockwise.
Grip
Handle
Raise
Lower
22
Grip
