2. Oxygen cylinder holder (PC-5041)
■
The oxygen cylinder holder can be used by inserted into one of the accessories attachment
holes.
■
Always use a 500L oxygen cylinder with a diameter between 9.5cm and 11.5cm.
Setscrew
Knob bolt
Oxygen cylinder
holder
42
●
Attach the oxygen cylinder holder to one of the four accessories attachment holes. If it is attached
to a hole other than the accessories attachment holes, there is a risk of an injury by the oxygen
cylinder holder falling, or a risk of malfunction of the oxygen cylinder holder or the stretcher.
●
Make sure that the knob bolt is firmly tighten. There is a risk of insufficient oxygen supply.
●
When using the oxygen cylinder, take care to prevent it from coming into contact with any
objects in the vicinity of the stretcher. There is a risk of an injury by damage of a flow meter or an
①
Insert the oxygen cylinder holder into one of the accessories attachment holes.
②
Firmly tighten the setscrew at the selected accessories attachment hole.
③
Loosen the knob bolt on the oxygen cylinder holder, and then slowly insert the oxygen
cylinder into the holder from the top.
④
Firmly tighten the knob bolt to fasten the oxygen cylinder.
●
The description in this instruction manual may differ from the actual product due to
specification changes. For any queries, please feel free to contact your distributor.
Accessories attachment hole
Loosen
Loosen
Tighten
Tighten
SUITABLE PRODUCTS
This oxygen cylinder holder is made for attaching to the medical device to use the oxygen cylinder.
