SIGNAL
To apply a video test pattern, follow the instructions below:
1. Go to Menu > Monitoring > Test Signals > Signal.
2. Select one of the following options:
Off
Chip Chart
SMPTE Bars
Luma
AUDIO TONE
To apply an audio tone, follow the instructions below:
1. Go to Menu > Monitoring > Test Signals.
2. Toggle Tone On/Off.
INFO MODE
To set up how certain information displays on the user interface, go to Menu > Monitoring > Info Mode.
Figure: Info Mode
EXPOSURE
Shutter Angle:When you change the frame rate in this mode, the shutter angle stays to the current setting
Shutter Speed:When you change the frame rate in this mode, the shutter angle changes to compensate exposure change
POWER
Current Batt %: Displays the remaining percentage of active battery. (Default)
Total Time: Displays the total run-time left of battery power, taking into account all available batteries.
VU METER
Input: Displays levels of audio inputs (pre-mixer). (Default)
Output: Displays levels of audio outputs (post-mixer).
COPYRIGHT © 2017 PANAVISION INTERNATIONAL, L.P.
FW: V-0.5.35
|
63
PANAVISION MILLENNIUM DXL
Summary of Contents for Millennium DXL
Page 1: ...PANAVISION COM...