CONNECT WIRELESSLY TO A DEVICE VIA AD-HOC MODE
In Ad-Hoc mode, the camera and your device connect to each other. To connect the camera to your device via an ad-hoc
network, follow the instructions below:
1. Go to Menu > Network > WiFi.
2. Select Ad-Hoc from the Mode menu.
3. Select AdHoc Settings on the WiFi menu.
4. Select a wireless channel from the Channel menu. The default is Ch1, and you can select one out of 11 channels.
5. Select a security option from the Encryption menu:
NONE: The connection will be unsecured.
WPA2: The connection will be encrypted via WPA2.
6. If you selected WPA2 as the encryption option, type the passphrase that will be required to access the network.
7. Close the menu.
Figure: Ad-Hoc Mode
8. Connect your device to the ad-hoc network created by the camera. The steps in this procedure depend on what type of
device and operating system you are using. For example, if you are connecting an iOS device, go to Settings > Wi-Fi >
Devices, and select the camera name.
The camera name displays on the WiFi screen in-camera. The camera and your device are now connected.
NOTE: If you created a passphrase for the network, you will need to enter that passphrase.
COPYRIGHT © 2017 PANAVISION INTERNATIONAL, L.P.
FW: V-0.5.35
|
80
PANAVISION MILLENNIUM DXL
Summary of Contents for Millennium DXL
Page 1: ...PANAVISION COM...
