PANAVISION Millennium DXL Operation Manual Download

Page: 90 / 152

RECORDING

Displays the following recording information:

Format
Recording Frame Rate
Project Time Base
REDCODE

To change the recording information, go to

"Project Settings" on page 42

PRORES

This status menu is available only if recording to an Apple ProRes codec is enabled.
Displays the following codec information:

Video Codec
Resolution
Frame Rate
Dimensions

To change the recording information, go to

"Project Settings" on page 42

DNXHD/HR

This status menu is available only if recording to an Avid codec is enabled.
Displays the following codec information:

Video Codec
Resolution
Frame Rate
Dimensions

To change the recording information, go to

"Project Settings" on page 42

LOOK

Displays the following information:

Color Temperature
Tint
ISO
Main Output Preset: To change this, go to

"Color Space (Defaults)" on page 68

Main Color Space: To change this, go to

"Color Space (Defaults)" on page 68

ATTACHED MODULES

Lists all attached modules.

FW: V-0.5.35

PANAVISION MILLENNIUM DXL

Summary of Contents for Millennium DXL

















































































































































Search results

Summary of Contents for Millennium DXL

Reviews:

Related manuals for Millennium DXL

Brands by name

Popular brands

PANAVISION Millennium DXL, Operation Manual

Search results

Summary of Contents for Millennium DXL

Reviews:

Related manuals for Millennium DXL

Brands by name

Popular brands