6G/3G HD-SDI
A standard 75 ohm BNC connector provides the following output:
Broadcast specification 3G-SDI (HD-SDI) video output (default mode is Clean)
Two (2) channels of embedded audio
Time of Day and Edge timecode
Record Tally flag
Clip name information (as SMPTE RP-188 VITC2 HANC metadata)
The 6G/3G-SDI (HD-SDI) output provides the formats described in the table below:
6G/3G-SDI (HD-SDI) OUTPUT FORMATS
1
VIDEO FEED
2
FREQUENCY (HZ)
3
SMPTE STANDARD
720p
23.98, 24.00, 25.00, 29.97, 30.00, 50.00, 59.94
SMPTE ST 292-1 (1.485 Gbps)
1080p 10-bit 4:2:2
23.98, 24.00, 25.00, 29.97, 30.00
SMPTE ST 292 (1.485 Gbps)
1080p 10-bit 4:2:2
50.00, 59.94, 60.00
3G-SDI
SMPTE ST 424 (2.970 Gbps)
SMPTE ST 425 (2.970 Gbps)
UHD 10-bit 4:2:2
23.98, 24.00, 29.97, 30.00
6G-SDI
SMPTE 2081(5.940 Gbps)
1. Ensure you select a frequency supported by your monitor.
2. The output is progressive scan (p); it does not support progressive segmented frame (PsF) or interlaced (i) scan formats.
3. The frequency options depend on project time base. If you have a non-drop frame project time base (such as 24.00), you can select only non-drop frame
frequencies. If you have a drop frame project time base (such as 23.98), you can select only drop frame frequencies.
75 OHM BNC CONNECTOR
PIN
SIGNAL
DESCRIPTION
DIRECTION
Center
6G/3G-SDI
SMPTE ST 424
Out
Shield/Screen
GROUND
Camera ground
N/A
COPYRIGHT © 2017 PANAVISION INTERNATIONAL, L.P.
FW: V-0.5.35
|
141
PANAVISION MILLENNIUM DXL
Summary of Contents for Millennium DXL
Page 1: ...PANAVISION COM...