145
Available commands are listed below.
S Enable/disable the Ring Redundant Protocol function.
Press "S." The command prompt changes to "Enable or Disable RRP status (E/D)>." Press
"E" to enable the function. Press "D" to disable it.
C Create a new domain.
Press "C." The RRP Domain Creation Menu opens. For details, refer to the next section
(4.7.10.a).
D Delete a domain.
Press "D." The command prompt changes to "Enter RRP Domain Name >." Enter the
domain name to delete.
M Modify domain settings.
Press "M." The command prompt changes to "Enter RRP Domain Name >." Enter the
domain name to modify the settings. Then, the RRP Domain Modification Menu opens.
For details, refer to the next section (4.7.10.b).
H Show the domain information.
Press "H." The command prompt changes to "Enter RRP Domain Name >." Enter the
domain name to display the domain information. Then, the RRP Domain information
Menu opens. For details, refer to the next section (4.7.10.c).
Q Return to the previous menu.
Note:
The Ring Redundant Protocol function and the Internet Mansion mode
cannot be used simultaneously.
Note:
Disable the loop detection function for the primary/secondary ports.
For detailed loop detection function settings, refer to 4.7.11.