127
4.7.7. Port Based Access Control Configuration Menu
On the Advanced Switch Configuration Menu screen, pressing "x" opens the
802.1X Access Control Configuration screen as shown in Fig. 4-7-23. On this
screen, you can configure the IEEE 802.1X access control.
The supported authentication methods are EAP-MD5, TLS, and PEAP.
Fig. 4-7-23 IEEE802.1X Access Control Configuration
Note: When IEEE802.1X port-based authentication is activated, MAC learning
cannot be disabled.
PN27089K/PN27089KA Local Management System
Advanced Switch Configuration -> Port Based Access Control Configuration Menu
NAS ID : Nas1
Port No : 1
Port Status : Authorized
Port Control : Force Authorized
Transmission Period : 30 seconds
Supplicant Timeout : 30 seconds
Server Timeout : 30 seconds
Maximum Request : 2
Quiet Period : 60 seconds
Re-authentication Period : 3600 seconds
Re-authentication Status : Disabled
-------------------------------- <COMMAND> -----------------------------------
[P]ort No Q[u]iet Period
Port [C]ontrol R[e]-auth Period
[T]ransmission Period Re-[a]uth Status
Supp[l]icant Timeout [I]nitialize
Server Time[o]ut [R]e-auth Initialize
[M]aximum Request [Q]uit to previous menu
Command>
Enter the character in square brackets to select option