Panasonic SF4D-*-01 Series Instruction Manual Download Page 50

Page: 50 / 170

Mounting

<Mounting slim type FC-SFDH□-S>

Step 1 Press the front protective cover into the groove on the cap (black part) on the device.
Step 2 Press the front protective cover into all the grooves on the device.

Step 3 Use a soft cloth to gently wipe off any dirt (such as fingerprints) that adheres to the front

protective cover.

Front protective cover (slim type)

FC-SFDH□-S

(option)

Insert the cover here first

This device

Groove on the black cap

Area where the

cover is inserted first

<Removing slim type FC-SFDH□-S>

Insert your fingers into the gaps on the top and bottom of the front protective cover and slowly

remove the cover from the device.

CAUTION

Do not apply excessive force when removing the front protective cover from the device. Doing so

may break the cover.

Summary of Contents for SF4D-*-01 Series











































































































































































Search results

Summary of Contents for SF4D-*-01 Series

Reviews:

Related manuals for SF4D-*-01 Series

Brands by name

Popular brands

Panasonic SF4D-*-01 Series, Instruction Manual

Search results

Summary of Contents for SF4D-*-01 Series

Reviews:

Related manuals for SF4D-*-01 Series

Brands by name

Popular brands