Panasonic SF4D-*-01 Series, Instruction Manual

Page: 139 / 170

Specifications
© Panasonic Industrial Devices SUNX Co., Ltd. 2020 139
Common specifications
Type 10mm pitch type 20mm pitch type 40mm pitch type
Model No. SF4D-F □ -01 SF4D-H □ -01 SF4D-A □ -01
Sensing range (effective)
Short mode: 0.2 to 7m
Long mode: 0.8 to 12m
(selectable by DIP switch)
Short mode: 0.2 to 9m, Long mode: 0.8 to 15m
(selectable by DIP switch)
Minimum sensing object ø14mm opaque object ø25mm opaque object ø45mm opaque object
Effective aperture angle ±2.5° or less at a sensing range of 3m or longer (based on IEC 61496-2)
Supply voltage 24V DC
+20
-30
% Ripple P-P 10% or less (excluding voltage drop due to cable)
Control output
(OSSD 1 / 2)
PNP open-collector transistor / NPN open collector transistor (selectable)
<PNP output selected>
• Maximum source current: 350mA
• Applied voltage: Same as supply voltage
(between control output and +V)
• Residual voltage: 2V or less (source current 350mA)
(excluding voltage drop due to cable)
• Leakage current 0.2mA or less
(including power OFF state)
• Maximum load capacity: 2.2μF
(from no load to maximum output current)
• Load wiring resistance: 3Ω or less
<NPN output selected>
• Maximum sink current: 350mA
• Applied voltage: Same as supply voltage
(between control output and 0V)
• Residual voltage: 2V or less (sink current 350mA)
(excluding voltage drop due to cable)
• Leakage current 0.2mA or less
(including power OFF state)
• Maximum load capacity: 2.2μF
(from no load to maximum output current)
• Load wiring resistance: 3Ω or less
Operation mode
(Output operation)
ON when all beams are received, OFF when one or more beams are blocked
(Also OFF when internal sensor error or synchronization signal error occurs)
Protective circuit
(short circuit protection)
Incorporated
Response time
OFF response: 10ms or less (not connected in serial), 18ms or less (connected in serial)
(Refer to <Response time by number of beam channels> )
ON response: 50ms or less (Note 1, 2)
Auxiliary output
(AUX)
(Non-safety output)
PNP open-collector transistor / NPN open collector transistor (selectable)
<PNP output selected>
• Maximum source current: 60mA
• Applied voltage: Same as supply voltage
(between auxiliary output and +V)
• Residual voltage: 2V or less (source current 60mA)
(excluding voltage drop due to cable)
• Leakage current 0.2mA or less
(including power OFF state)
<NPN output selected>
• Maximum sink current: 60mA
• Applied voltage: Same as supply voltage
(between auxiliary output and 0 V)
• Residual voltage: 2V or less (sink current 60mA)
(excluding voltage drop due to cable)
• Leakage current 0.2mA or less
(including power OFF state)
Operation mode
(Output operation)
OSSD ON: OFF, OSSD OFF: ON
Protective circuit
(short circuit protection)
Incorporated
Response time OFF response: 60ms or less, ON response: 60ms or less
Synchronization method Line synchronization / optical synchronization (selectable by DIP switch)
Interference preven-
tion function
Line synchronization: Two units or less (auto)
Optical synchronization:Two units or less (selectable by DIP switch)
• Series connection: 5 units or less (total number of beam channels 256 or less)
Protective structure IP67, IP65 (IEC), NEMA Type 13 (NEMA 250)
Ambient temperature −10 to +55°C (No condensation or icing), Storage: −25 to +60°C
Ambient humidity 30 to 85% RH, storage: 30 to 95% RH
Ambient illumination Incandescent light: 5,000ℓx or less at the light-receiving surface
Degree of pollution 3
Operating altitude 2,000m or less (Note 3)
Withstand voltage AC 1,000V for one minute (between all supply terminals connected together and enclosure)
Insulation resistance
20MΩ or higher using DC 500V megger (between all supply terminals connected
together and enclosure)
Vibration resistance
10 to 55Hz, 0.75mm double amplitude for two hours each in X, Y, and Z directions
Malfunction resistance 10 to 55Hz, 0.75mm double amplitude 20 times each in X, Y, and Z directions