r
The connection was lost when no operation was performed after connecting with MIRRORING
f
The connection may be broken after specific time depending on the device in use. Check the power save
setting, etc., of the device.
f
It may improve by updating the wireless driver or the firmware. Contact the support service of the manufacturer
of the device in use.
r
The image contents cannot be displayed
f
When using in moderator mode, the HDCP compliant DVD or copyright protected contents cannot be displayed.
r
Others
f
Depending on the device in use, a confirmation screen for reconnection with connection name of “from
UNKNOWN” may be displayed, however, you cannot reconnect from that screen.
f
Depending on the device in use, it may be required to remove the device during connecting. In such a case,
delete the device following the instruction of the device.
160 -
ENGLISH
Chapter 6 Maintenance - FAQ
