Panasonic PT-REZ80 Operating Instructions Manual Download

Page: 65 / 313

Chapter 2

Getting Started — Connecting

ENGLISH - 65

Connecting example when using the contrast synchronization function/shutter

synchronization function

In a case to construct a multi-display by linking projected images from multiple projectors, following functions can

be used by synchronizing multiple projectors using the <MULTI SYNC IN> / <MULTI SYNC OUT> terminals or the

<SERIAL IN> / <SERIAL OUT> terminals.

Contrast synchronization function

A linked screen with balanced contrast can be displayed by sharing the brightness level of the image signal

displaying in each projector.

To use this function, set the [PROJECTOR SETUP] menu

→

[MULTI PROJECTOR SYNC] for each

synchronized projector as follows.

Set [MULTI PROJECTOR SYNC]

→

[MODE] to anything other than [OFF].

Set [MODE] to [MAIN] only on one projector that is synchronized. Set [MODE] to [SUB] for all other projectors.

Set [MULTI PROJECTOR SYNC]

→

[CONTRAST SYNC] to [ON].

Unify the [CONTRAST MODE] setting in the [PICTURE] menu

→

[DYNAMIC CONTRAST] for each linked

projector to [1] or [2]. If there is any projector that does not have the [CONTRAST MODE] setting menu, unify

the setting to [1].

Shutter synchronization function

This is a function to synchronize the shutter operation of the specified projector to other projectors, and the

effect using the shutter function including the fade in/fade out operation can be synchronized.

To use this function, set the [PROJECTOR SETUP] menu

→

[MULTI PROJECTOR SYNC] for each

synchronized projector as follows.

Set [MULTI PROJECTOR SYNC]

→

[MODE] to anything other than [OFF].

Set [MODE] to [MAIN] only on one projector that becomes the synchronization source within the linked

projectors. Set [MODE] to [SUB] for all other projectors.

Set [MULTI PROJECTOR SYNC]

→

[SHUTTER SYNC] to [ON].

Unify the [CONTRAST MODE] setting in the [PICTURE] menu

→

[DYNAMIC CONTRAST] for each linked

projector to [1] or [2]. If there is any projector that does not have the [CONTRAST MODE] setting menu, unify

the setting to [1].

Connecting example

Connect all the projectors to be linked in a loop by daisy chain connection when using the contrast

synchronization function/shutter synchronization function. The number of linked projectors is limited to the

maximum of 64 projectors.

For <MULTI SYNC IN> / <MULTI SYNC OUT> terminals

Note

The contrast synchronization function and the shutter synchronization function can be used simultaneously.

For details on the settings of the contrast synchronization function and the shutter synchronization function, refer to the [PROJECTOR

SETUP] menu

→

[MULTI PROJECTOR SYNC] (

page 176)

Connecting terminals of the projector to synchronize

Connecting terminals of the synchronization source

Connecting terminals of the projector to synchronize

Summary of Contents for PT-REZ80


























































































































































































































































































































Search results

Summary of Contents for PT-REZ80

Reviews:

Related manuals for PT-REZ80

Brands by name

Popular brands

Panasonic PT-REZ80, Operating Instructions Manual

Search results

Summary of Contents for PT-REZ80

Reviews:

Related manuals for PT-REZ80

Brands by name

Popular brands