Chapter 1
Preparation — About your projector
ENGLISH - 35
Projector body
2 3 4 5
6
7
7
8
6
7
14 15 16
10
6
6
9
1
11
13
12
17
2
3
4
5
18
1
Remote control signal receiver (front)
2
Power indicator <ON (G)/STANDBY (R)>
Indicates the status of the power.
3
Light source indicator <LIGHT1>
Indicates the status of light source 1.
4
Light source indicator <LIGHT2>
Indicates the status of light source 2.
5 Temperature indicator <TEMP>
Indicates the internal temperature status.
6
Adjustable feet
Adjusts the projection angle.
7
Intake vent
8 Projection lens
(Only models with lens)
9
Remote control signal receiver (rear)
10
Exhaust vent
11 Control panel (
x
page 36)
12 Security slot
This security slot is compatible with the Kensington security
cables.
13 Connecting terminals (
x
page 37)
14
<MAIN POWER> switch
Turns on/off the main power.
15
<AC IN> terminal
Connect the supplied power cord.
16 Power cord holder
17 NFC touch point
This is the touch point when using the near field communication
(NFC, Near Field Communication) function. A device such as a
smartphone equipped with the NFC function can be connected
to the projector by holding it near the touch point.
18
Security bar
A wire, etc., can be attached to prevent theft.
Attention
f
Do not block the intake/exhaust vents of the projector.
Front
Side
Rear
Top
Bottom
Projection direction
