Chapter 4
Settings — [PROJECTOR SETUP] menu
190 - ENGLISH
5) Press the <ENTER> button.
f
The confirmation screen is displayed.
6) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
The security password is the password set in the [SECURITY] menu
→
[SECURITY PASSWORD CHANGE].
Initial password of the factory default setting:
awsqawsq
f
To delete only a part of a registered signal, delete it following “Deleting the registered signal” (
x
page 195).
f
To return the setting of [Time Zone] in the [Adjust clock] page of the web control screen and the setting of the [PROJECTOR SETUP] menu
→
[DATE AND TIME]
→
[TIME ZONE] to the factory default settings, initialize them by one of the following methods.
g
Initializing by selecting the [PROJECTOR SETUP] menu
→
[INITIALIZE]
→
[FACTORY RESET]
g
Initializing by setting the [PROJECTOR SETUP] menu
→
[INITIALIZE]
→
[USER SETTINGS]
→
[OTHER USER SETTING] to
[INITIALIZE]
f
The self‑signed certificate already created in the [Certificate] page of the web control screen or the information of the server certificate
already installed can be deleted in the web control screen.
f
If initialized by selecting [FACTORY RESET], the
[INITIAL SETTING]
screen is displayed when the projection is started the next time.
Initializing the settings by selecting the items
1) Press
as
to select [INITIALIZE].
2) Press the <ENTER> button.
f
The
[SECURITY PASSWORD]
screen is displayed.
3) Enter a security password and press the <ENTER> button.
f
The
[INITIALIZE]
screen is displayed.
4) Press
as
to select [USER SETTINGS].
5) Press the <ENTER> button.
f
The
[USER SETTINGS]
screen is displayed.
6) Press
as
to select an item.
[OPERATION SETTING]
The [PROJECTOR SETUP] menu
→
[OPERATION SETTING]
→
[OPERATING MODE] and [MAX
LIGHT OUTPUT LEVEL] are initialized.
[LIGHT OUTPUT] is not initialized. The [LIGHT OUTPUT] setting is maintained.
[STANDBY MODE]
The [PROJECTOR SETUP] menu
→
[STANDBY MODE] is initialized.
[REGISTERED SIGNAL]
All the signals registered in [SIGNAL LIST] are initialized.
[NETWORK/E-MAIL]
All the setting items under the [NETWORK] menu and all the setting items under the operation page
in the [Detailed set up] page and the Crestron Connected of the web control screen are initialized.
f
The items of [Time Zone], [Date], and [Time] in the web control screen are not initialized.
f
The information such as the self‑signed certificate already created in the [Certificate] page of the
web control screen or the server certificate already installed is not initialized.
[LOGO IMAGE]
Image registered in [USER LOGO] is initialized.
[UNIFORMITY]
The [DISPLAY OPTION] menu
→
[UNIFORMITY] is initialized.
[OTHER USER SETTING]
The user data other than mentioned above are initialized.
7) Press
qw
to switch the setting.
f
The items will switch each time you press the button.
[KEEP]
Does not return to the factory default settings and maintains the current settings when initialization is
executed by [USER SETTINGS].
[INITIALIZE]
Returns to the factory default settings when initialization is executed by [USER SETTINGS].
f
Repeat Steps
6)
to
7)
until the desired initialization items are set.
8) Press
as
to select [INITIALIZE].
9) Press the <ENTER> button.
f
The confirmation screen is displayed.
10) Press
qw
to select [OK], and press the <ENTER> button.
