Panasonic Micro-Imagechecker PV310, Use Manual, Page: 318 / 363

310
Information
on the PV310 and Hel
p
Function
Se
ttin
g
s
Cha
p
ter 1
4
14.1.4 Setting IP Address
The following instructions explain how to assign the IP address to your PV310. IP address is required when
inspection result and measured data are output to the PC via Ethernet.
Changing the IP address of your PV310
1. Select “INFO.” > “IP Address” from the menu bar to change the IP
address.
The window for assigning the IP address appears.
2. Tilt the ENTER key to assign the IP address.
The cursor moves to the IP address entry field.
3. After entering the IP address, highlight “Enter” on the soft
keyboard.
4. Select “SAVE” > “Save” from the menu bar to save the new
IP address.
5. Reboot the PV310 to configure the new setting available.
• IP address that should be assigned differs depending on the IP address of the external device.
Example)
IP address of external device is 192.168.1.100
IP address of PV310: 192.168.1.nnn
192.168.1 Assign the same address as the external device
nnn Assign the number between 1 and 254 (except 100)
• IP address initial value: 192.168.1.254
• IP address setting window
- BS: Deletes one character before the cursor position.
- <-, ->: Cursor moves in the arrow directions.
14.1.5 Version Information
Displays the version information on your PV310. When you contact us, please inform the version information on
your PV310.
To display the information on version:
1. Select “INFO.” > “About MICRO-IMAGECHECKER” from the menu bar.
The information on version is displayed.