manualshive.com logo in svg

Panasonic Micro-Imagechecker PV310, Use Manual

Share
Download
Panasonic Micro-Imagechecker PV310 Use Manual Download Page 311

 

303 

Cha

p

ter 1

3 

Usin

g

 a Com

p

act Flash Memor

y Card

Restoring the Saved Images 

With this feature, you can import the images saved with an image saving feature and backed up to a Compact Flash 
memory card into the PV310 image storage area. But, only if more than two pairs of images are saved in the 
specified folder, the images are imported into the PV310 image storage area. Note that if only one pair of images is 
saved on the Compact Flash memory card, the images are will be imported as a memory image. 
 

To Restore Saved Images: 

Follow the same steps to restore the saved images that were used for restoring the memory images. Refer to 
page 219. 

 

If the backed up images are saved in the specified directory, the images are automatically restored. 
The images output using the Image Output function or backed up from the PV310 can be also restored if they 
fulfill the following conditions: 

• 

Bitmap format, 8-bit, Size: 512 (horizontal) x 480 (vertical) 

• 

Save the image as a file name to suite the format in the table shown on the previous page. 

• 

Save the image files in the following directory:   
Panasonic MEW Vision¥PV310¥Image¥Image nn (nn = 01 - 99). 

Summary of Contents for Micro-Imagechecker PV310












































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands