Panasonic LP-400 Series, External Control Manual

Page: 17 / 180

17
1-2-2 Operation procedure with external control
⿎
Operation example when controlling the laser marker from external control devices such as
PLC
Reference
• It is available to the external control combining I/O, and serial communication commands.
• Configure the environment setting on the I/O communication in advance before using external control. Refer to “1-3
Before External Control” (P.18).
Turn ON key switch of laser marker controller
The device is ready for receiving the marking starting signal (trigger).
Refer to “1-3-3 Shift to remote mode” (P.23).
Marking (Laser radiation)
Control by serial communication commands I/O control
Open shutter
Select file
READY output ON
Marking trigger input ON
Laser pumping ON
Remote mode ON
about 15 to 20 seconds
Control by using I/O
or communication
commands
ME-LP400V-EX-6