Panasonic KX-UT670, Administrator'S Manual

Page: 224 / 250

8.1 Backup and Restore
You can back up user data (including Web programming settings) to an SD card, or restore data from the SD
card.
Only the built-in applications are stored on the SD card. Third-party applications cannot be backed up.
The data is saved onto the SD card as follows:
Folder name /sdcard/kx-ut670
Backup data file name YYYYMMDDHHMM(UTC)_backup.dat
Note
•
The time stamp of the backup data file will be in UTC, regardless
of the time zone setting.
Backup information file name bkinfo.dat
Notice
•
It is the user’s responsibility to ensure that the backup data saved on the SD card is kept secure.
To Back Up Data to an SD Card
1.
Press on the Home screen, and then tap [Settings] .
2.
Tap [Administration] , enter the administrator password, and then tap [OK] .
3.
Tap [Backup and Restore] .
4.
Tap [Backup data to SD card] .
5.
On the backup confirmation window, tap [OK] .
6.
Enter the new password for backup, and enter it again for confirmation.
7.
When the completed message is displayed, tap [OK] .
Note
•
Backup can be performed only when the unit is idle. Also, the unit cannot receive calls during the
backup.
•
Only 1 backup file can be stored on the SD card. If the SD card contains a backup file, the existing file
is overwritten.
•
The password must consist of 8 or more ASCII characters (case-sensitive) (
®
see Entering
Characters in 4.2.4 Accessing the Web User Interface ). Backup can also be performed without
requiring a password.
•
If you press during the backup, the backup will be canceled.
To Restore Data from the SD Card
1.
Press on the Home screen, and then tap [Settings] .
2.
Tap [Administration] , enter the administrator password, and then tap [OK] .
3.
Tap [Backup and Restore] .
4.
Tap [Restore data from SD card] .
5.
Enter the password that was set when the data was stored.
6.
On the restore confirmation window, tap [OK] .
224 Administrator Guide Document Version 2012-07
Section 8 Backup and Restore