Panasonic KX-UT670, Administrator'S Manual

Page: 212 / 250

6.1 Registering One-touch Buttons and BLF Buttons
You can register One-touch buttons and BLF (extension status display) buttons by setting the configuration
file as shown below (
®
see 5.6.4 Flexible Button Settings ).
For more details about flexible buttons, refer to the Operating Instructions on the Panasonic Web site (
®
see
Introduction ).
Registering a One-touch button:
•
Set "
FLEX_BUTTON_FACILITY_ACTx
" to "
X_PANASONIC_IPTEL_ONETOUCH
".
•
Specify a 1–32 digit number in "
FLEX_BUTTON_FACILITY_ARGx
".
Registering a BLF button:
•
Set "
FLEX_BUTTON_FACILITY_ACTx
" to "
X_PANASONIC_IPTEL_CONTACT
".
•
Specify a 1–32 digit number in "
FLEX_BUTTON_FACILITY_ARGx
".
6.2 Setting the Feature Number to Access Voice Mail
You can set the feature number to access voice mail by setting the configuration file as shown below.
•
Specify the telephone number to access the voice mail server in "
VM_NUMBER_n
" (
®
see 5.8.1 Call
Control Settings ).
6.3 Registering Flexible Buttons
You can assign certain features to flexible buttons by specifying the flexible button configuration file
parameters.
•
For details about flexible button configuration file parameters, see 5.6.4 Flexible Button Settings .
6.4 Customizing the Phone
You can set the wallpaper of the Home screen, the wallpaper of the Phone screen, and the logo of the Phone
screen via configuration file programming, using the following settings.
•
WALLPAPER_URI_HOME
(
®
see Page 174)
•
WALLPAPER_URI_PHONE
(
®
see Page 174)
•
LOGO_URI_PHONE
(
®
see Page 175)
Also, you can set whether the user can change the wallpaper of the Home screen and the wallpaper of the
Phone screen via phone user interface programming.
1.
Press on the Home screen, and then tap [Settings] .
2.
Tap [Administration] , enter the administrator password, and then tap [OK] .
3.
Tap [Customize] .
4.
Specify [Specify through configuration file] , [Forbid change of the home screen wallpaper] , or
[Forbid change of the phone screen wallpaper] .
Note
•
When a value has been specified (anything other than an empty string) for
"
WALLPAPER_URI_HOME
" or "
WALLPAPER_URI_PHONE
" through configuration file programming, and
[Specify through configuration file] is selected, users cannot change the wallpaper of that screen.
212 Administrator Guide Document Version 2012-07
Section 6 Useful Telephone Functions