Panasonic KX-UT670, Administrator'S Manual

Page: 144 / 250

Description Specifies the firmware version of the unit.
Note
•
Changing this setting may require restarting the unit.
Value Range 00.000–15.999
Default Value Empty string
FIRM_FILE_PATH
Value Format String
Description Specifies the URL where the firmware file is stored.
Note
•
This setting is available only when
"
FIRM_UPGRADE_ENABLE
" is set to "
Y
".
•
Changing this setting may require restarting the unit.
Value Range Max. 500 characters
Note
•
The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>".
–
"<user>" must be less than 128 characters.
–
"<password>" must be less than 128 characters.
–
"<user>:<password>@" may be empty.
–
The total of "<scheme>://" and "<host>:<port>/<url-path>"
must be less than 245 characters.
–
":<port>" can be omitted if you do not need to specify the
port number.
•
If "{mac}" is included in this URL, it will be replaced with the
unit’s MAC address in lower-case.
•
If "{MAC}" is included in this URL, it will be replaced with the
unit’s MAC address in upper-case.
•
If "{MODEL}" is included in this URL, it will be replaced with the
unit’s model name.
•
If "{fwver}" is included in this URL, it will be replaced with
"
FIRM_VERSION
" depending on the system. Note that this rule
differs from other parameters such as "
SIP_USER_AGENT
".
Default Value Empty string
Web User Interface Reference Firmware File URL (Page 122)
5.4.5 Provisioning Settings
OPTION66_ENABLE
Value Format Boolean
144 Administrator Guide Document Version 2012-07
Section 5 Configuration File Programming