Panasonic KX-UT670, Administrator'S Manual

Page: 65 / 250

Button Function
Save
Applies changes and displays a result message (
®
see 4.9 Result
Messages in this section).
Cancel Discards changes. The settings on the current screen will return to the values
they had before being changed.
Refresh Updates the status information displayed on the screen. This button is
displayed in the upper-right area of the
[Network Status] and [VoIP Status]
screens.
Entering Characters
In the Web user interface, when specifying a name, message, password, or other text item, you can enter any
of the ASCII characters displayed in the following table with a white background.
However, there are additional limitations for certain types of fields as follows:
•
Number field
–
You may only enter a sequence of numeric characters.
–
You cannot leave the field empty.
•
IP Address field
–
You can enter the IP address using dotted-decimal notation (i.e., "n.n.n.n" where n=0–255).
–
You cannot enter invalid IP addresses, for example, "0.0.0.0", "255.255.255.255", or "127.0.0.1".
•
FQDN field
–
The field cannot contain ", &, ', <, >, or trailing spaces.
–
You can enter the IP address using dotted-decimal notation (i.e., "n.n.n.n" where n=0–255).
–
You cannot enter invalid IP addresses, for example, "0.0.0.0", "255.255.255.255", or "127.0.0.1".
•
Authentication ID/Password field
–
The field cannot contain ", &, ', :, <, >, or space.
–
The length of user password and administrator password must be from 6 to 16 characters.
•
Display Name field (
®
see [Display Name] in 4.7.2.1 Call Control )
–
This is the only field in which you can enter Unicode characters.
Document Version 2012-07 Administrator Guide 65
Section 4 Web User Interface Programming