Panasonic KX-TG2344C Operating Instructions Manual Download

Page: 8 / 80

Location of Controls

Handset soft keys

Two soft keys are used to select functions displayed
directly above each key. Functions displayed above the
keys will change depending on the state of use.
On this sample display, “

(VE)

” and “

Mute

” are

displayed above the soft keys.

• When a function name does not appear above a soft key, the soft key has no

function.

Handset navigator key

Scrolls up

[

]

and down

[

]

the function menu, the Caller

List and the phone book.
Increases

[

]

or decreases

[

]

the handset ringer and

receiver/speaker volumes.

Base unit display

“

” flashes when no new messages can be

recorded. Erase unnecessary messages (p. 59).

“

” flashes until you set the date and time, and

flashes after a power failure. If it is flashing, set the
date and time (p. 14).

“

” functions as follows.

• “

” displays when a handset is operating the Answering System.

Message counter shows:
—the total number of recorded messages. If the recording time is set to

“Greeting only”, “

” will be displayed (p. 23).

—the selected volume level while you are adjusting the volume (p. 22).
—“

” when your greeting message was not recorded correctly (p. 21).

Throughout these Operating Instructions:
• The soft keys are indicated by what is displayed above the keys.

e.g. “Press

Mute

.” indicates “Press the soft key below

Mute

”.

• The navigator key is indicated by the arrows

[

]

[

]

Off (invisible)

The line is free.

The line is being used.

Flashing

A call is on hold on the handset or the Answering
System is answering a call (p. 54).

Flashing rapidly

A call is being received.

Talk

00-00-32

(VE) Mute

FULL

LINE

IN USE

1 2

FULL

LINE

IN USE

Pressing the right soft key selects mute “

Mute

”.

Pressing the left soft key selects Voice Enhancer “

(VE)

”.

PQQX14041ZA.book 8 ページ２００４年２月２０日　金曜日　午後３時３分

Summary of Contents for KX-TG2344C

















































































Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands

Panasonic KX-TG2344C, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands