Panasonic KX-TG2344C Operating Instructions Manual Download Page 45

Page: 45 / 80

lephone System

Transferring a Call

You can transfer an outside call to another handset.

From a

to another

• If the Auto Talk feature is turned on (p. 17), the paged handset user can also

answer a page by simply lifting the handset off the base unit or the charger.

Quick call transfer

You can transfer a call without waiting for the paged party to answer.

• The call will be transferred directly.
• The paged party can answer the transferred call by pressing

[

]

[

]

• After the paged party answers, the transfer is complete.
• If the paged party does not answer, press

[

]

[

]

to return to the outside call.

• If the paged party does not answer within 60 seconds after you hang up, your

phone will ring and the call will be returned to your phone. You may speak to the
caller again by pressing

[

]

[

]

If you do not answer the call within 4 minutes, the call will be disconnected.

During a call, press

[HOLD/INTERCOM]

, then page another handset

by pressing

Handset

Wait for the paged party to answer, then you can announce the transfer.

• After the paged party answers, “

Intercom hold

” is displayed.

• The paged handset user can answer by pressing

[

]

[

]

[HOLD/

INTERCOM]

. (Any buttons except

[

]

[

]

[OFF]

can be pressed to

answer the page.)

• If the paged party does not answer, press

[

]

[

]

to return to the outside

call.

To complete the transfer, press

[OFF]

During a call, press

[HOLD/INTERCOM]

, then press

Handset

Press

[OFF]

to hang up.

Handset

PQQX14041ZA.book 45 ページ２００４年２月２０日　金曜日　午後３時３分

Summary of Contents for KX-TG2344C

















































































Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands

Panasonic KX-TG2344C, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands