Panasonic KX-TG2344C Operating Instructions Manual Download Page 56

Page: 56 / 80

Listening to Messages

Using the Base Unit

You can see the total number of recorded messages on the base unit display. If the
NEW MESSAGE indicator flashes on the base unit, new messages have been
recorded.
• If the Message Alert is turned on (p. 25), the Ringer/Message Alert indicator on

the handset will flash slowly when new messages have been recorded and the
handset is not in use.

To play back messages

Press

[MESSAGE]

• The unit announces the number of new

messages and only new messages are played
back.

• When you have no new messages, the unit

announces “

No new messages. All message

playback

” and plays back all messages.

• When you have no messages, the unit

announces “

No messages

”.

• During playback, the display shows the message number.
• At the end of the last message, “

End of final message

” is heard. The unit will

announce the remaining recording time if it is less than 3 minutes.

Voice Day/Time Stamp:

During playback, the unit will announce the day and

time when each message was recorded (p. 14).

Base Unit

[MESSAGE]

NEW MESSAGE Indicator

PQQX14041ZA.book 56 ページ２００４年２月２０日　金曜日　午後３時３分

Summary of Contents for KX-TG2344C

















































































Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands

Panasonic KX-TG2344C, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands