Panasonic KX-TG2344C Operating Instructions Manual Download

Page: 71 / 80

Usef

ul Inform

ation

Troubleshooting

If the handset display shows error messages, see “If the Following Appears
on Your Display...” (p. 69–70) for the Cause & Remedy.

Telephone System

Problem

Cause & Remedy

“

No link to base. Move

closer to base, try
again.

” is displayed and an

alarm tone sounds.

• You are too far from the base unit. Walk

closer to the base unit.

• Confirm the base unit’s AC adaptor is

plugged in.

• Raise the base unit antenna.
• If the above remedies do not solve the

problem, the handset may have lost
communication with the base unit. Register
the handset again (p. 53).

Static, sound cuts in/out,
fades. Interference from other
electrical units.

• Move the handset and base unit away from

other electrical appliances (p. 3).

• Walk closer to the base unit.
• Raise the base unit antenna.

The handset does not ring.

• The ringer volume is turned off. Set to high,

medium, or low (p. 18).

The handset display is blank.

• If only the handset display is blank, fully

charge the battery (p. 10).

You cannot program any
function items.

• Programming is not possible while the

handset and/or base unit is being used.

• Do not pause for over 60 seconds while

programming.

• Walk closer to the base unit.
• While another user is listening to messages

or the Answering System is handling a call,
you cannot program. Try again later.

While programming or
searching, the handset starts
to ring and the program/
search stops.

• A call is coming in. To answer the call, press

[

]

[

]

. Try again from the beginning

after hanging up.

You cannot make an intercom/
outside call.

• Your handset is in remote operation mode

(p. 57). Exit by pressing

[OFF]

• The handset you called is too far from the

base unit.

• If the handset or base unit is in use, you may

not be able to make a call. Try again later.

PQQX14041ZA.book 71 ページ２００４年２月２０日　金曜日　午後３時３分

Summary of Contents for KX-TG2344C

















































































Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands

Panasonic KX-TG2344C, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands