Panasonic KX-TG2344C Operating Instructions Manual Download Page 11 | Manualshive

Page: 11 / 80

background image

Pr

epar

at

ion

11

Installation

Recharge

Recharge the battery when:

—“

Recharge battery

” is displayed on the handset,

—“

7

” flashes, or

—the handset beeps intermittently while it is in use.
• The display will continually indicate that “

Recharge battery

” and/or “

7

” will

flash when the handset battery is charged for less than 15 minutes and the
handset is lifted off the base unit or charger.

• If the battery has been discharged, the handset will display “

Charge for 6h

”

and “

8

” when you place the handset on the base unit or charger. The handset

will not work unless the battery is charged. Continue charging.

A nickel metal hydride battery that is recyclable powers the
product you have purchased. Please call 1-800-8-BATTERY for
information on how to recycle this battery.

Battery information

• A fully charged battery will give you up to 5 hours of continuous talk time, or keep

your handset in Standby mode to receive incoming calls for up to 11 days (if no
phone calls are made). Battery power is consumed whenever the handset is off of
the base unit or charger, even when the handset is not in use. The longer you
leave the handset off of the base unit or charger, the time you can actually talk on
the handset will be shortened. Actual battery performance depends on a
combination of how often the handset is in TALK mode and how often it is in
Standby mode.

•

Clean the charge contacts of the handset, the base unit and the charger with
a soft, dry cloth once a month. Clean more often if the unit is subject to
grease, dust or high humidity,

otherwise, the battery may not charge properly.

• If the battery is fully charged, you do not have to place the handset on the base

unit or charger until “

Recharge battery

” is displayed and/or “

7

” flashes.

This will maximize the battery life.

• If you want to keep the battery fully charged at all times, place the handset on the

base unit or charger when the handset is not used. The battery cannot be
overcharged.

Battery replacement:

If you cleaned the charge contacts and fully charged the battery, but after a few
telephone calls, “

Recharge battery

” is displayed and/or “

7

” continues to

flash, or “

Charge for 6h

” and “

8

” are displayed, the battery may need to

be replaced. Please replace with a new Panasonic HHR-P104 battery. To
replace the battery, see page 10.

After your Panasonic battery
is fully charged, you can
expect the following
performance:

Operation

Operating time

While in use (TALK)

Up to 5 hours

While not in use (Standby)

Up to 11 days

Recharge battery

PQQX14041ZA.book 11 ページ２００４年２月２０日　金曜日　午後３時３分

«
...
9
10
11
12
13
...
»

Summary of Contents for KX-TG2344C

















































































Reviews:

No comments

Related manuals for KX-TG2344C

Brand: Octopus Pages: 131

Cordless Telephone

Brand: Radio Shack Pages: 12

Brand: Scitec Pages: 12

Brand: VTech Pages: 7

Brand: SwiftCam Pages: 2

Brand: Depaepe Telecom Pages: 2

Brand: Dictaphone Pages: 24

Brand: Yealink Pages: 56

Brand: AEG Pages: 268

Brand: SpectraLink Pages: 68

Brand: Burnside Pages: 6

Brand: Doro Pages: 14

Brand: Doro Pages: 44

Brand: Louroe Electronics Pages: 8

Brand: Casio Pages: 15

Brand: Bell Atlantic Mobile Pages: 32

Brand: TELEFONICA Pages: 25

Brand: TELEFONICA Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands