Panasonic KX-TG2344C Operating Instructions Manual Download Page 62

Page: 62 / 80

Remote Operation from a Touch Tone Phone

Voice Menu

The shaded parts are voice prompts.

• 3 seconds after playback, the voice menu will try again from the beginning.
• The unit will announce the remaining recording time after playback if it is less than

3 minutes.

• If you hear “

Memory full

” after playback, erase unnecessary messages (p. 63).

• If you do not press any buttons within 10 seconds after a voice prompt, “

Thank you

for your call

” will be heard and the call will be disconnected.

Press 1 to play back new messages.

Press 2 for other functions.

Press 1 to record your message.

Press 2 for other functions.

Press 1 to erase all messages.

Press 2 for other functions.

A long beep sounds and “

messages

” is heard and all

recorded messages are erased.

Please leave your message.

1. Speak after the long beep.
2. When you finish recording a

memo message, hang up.

New Message Playback.

Only new messages are played
back. At the end of the last
message, “

End of final message

”

is heard.

Press 1 to play back all messages.

Press 2 for other functions.

All Message Playback.

All recorded messages are
played back. At the end of the
last message, “

End of final

message

” is heard.

Press

[1]

Press

[1]

Press

[1]

Press

[1]

Press

[2]

Press

[2]

Press

[2]

Press

[2]

PQQX14041ZA.book 62 ページ２００４年２月２０日　金曜日　午後３時３分

Summary of Contents for KX-TG2344C

















































































Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands

Panasonic KX-TG2344C, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands