Panasonic KX-TG2344C Operating Instructions Manual Download Page 14

Page: 14 / 80

Programmable Settings

Date and Time

We recommend that you set the date and time so that the unit will announce the
day and time each message was recorded when you play back messages.

• When entering the time in step 3, you cannot enter numbers greater than 12.

not use military time.

(To set 13:00 hours, enter “0100”, then select “

” in

step 4.)

• When the display language is set to French, you can use military time (see

page 14 of the French Operating Instructions)

To confirm the date and time,

repeat steps 1 and 2 above.

• The current date and time are displayed. When finished, press

[OFF]

Press

[MENU]

Scroll to “

Date and time

” by pressing

[

]

[

]

, then press

Select

Enter 2 digits each for the month, day, and
year. (e.g. To set May 15, 2004, enter “05
15 04”.)

Enter 4 digits for the time (hour and minute).
(e.g. To set 9:30, enter “0930”.)

• If you enter a wrong number, press

[

]

[

]

move the cursor to the incorrect number. Enter the
correct number.

Select “

” or “

” by pressing

AM/PM

Press

Save

• The date and time are set and “

” disappears

from the base unit display.

• If the handset beeps 3 times, the date and time

were not set correctly. Try again from step 3.

Press

[OFF]

The date and time may be incorrect after a power failure. When “

” flashes on

the base unit display, set the date and time again.

Handset

Date and time

Back

Select

Example

Date:

12.31.2004

Time:12:00 AM

AM/PM Save

Date:

05.15.2004

Time:09:30 AM

AM/PM Save

Date:

05.15.2004

Time:09:30 AM

AM/PM

Save

PQQX14041ZA.book 14 ページ２００４年２月２０日　金曜日　午後３時３分

Summary of Contents for KX-TG2344C

















































































Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands

Panasonic KX-TG2344C, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands